Description
Screwdrivers with “Take it easy” tool finder: colour coding according to profile and size stamp.
The chiseldriver is the solution for jobs that require more than just screwdriving. For fastening, chiselling and loosening seized screws or hose clamps. With an integrated impact cap that extends service live and reduces the risk of splintering. With a pound-thru hexagon blade made from high-grade material for -zero-loss transfer of high forces when struck with a hammer. The tough viscous tempered material prevents the blade from splintering or breaking. More TORQUE can be transferred by attaching an open-jawed or ring spanner to the integrated hexagon bolster.
A precisely-focused laser creates a sharp-edged surface structure. This laser treatment results in an edge hardness of up to 1000 HV 0.3. Wera Lasertip “bites” itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws.
The ergonomic design of the T-handle fills the palm of the hand. The fingers rest in the soft, rounded recess, and the whole hand is in contact with the handle – so there is no friction loss between the hand and handle.
A resilient ball ensures the hexagon socket screw to be clamped on the tool tip. Especially helpful in hard to reach areas where you can not use your other hand to hold the screw.
Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw!
In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool!
The additional short arm, which emerges laterally from the handle, allows the transmission of extremely high torques by using the long arm as a lever.
Features:
Bicycle tool set
With 7 T-handle screwdrivers, 5 screwdrivers and 2 chiseldrivers with impact cap
T-handle screwdriver for the transmission of particularly high tightening and loosening torque
T-handle screwdriver with holding function on the long arm for a secure hold of the screw on the tool
PH screwdriver with Lasertip tip for better hold on the screw head
Includes:
Qty.
Set Item
Dimensions
2x
354 Screwdriver for Hexagon Socket Screws
2 x 75 mm, 2.5 x 75 mm
5x
454 HF T-Handle Hexagon Screwdriver Hex-Plus with Holding Function
3 x 100 mm, 4 x 150 mm, 5 x 150 mm, 6 x 200 mm, 8 x 200 mm
1x
367 Screwdriver for TORX Screws
TX 10 x 80 mm
2x
467 TORX HF T-Handle Screwdriver with Holding Function
TX 20 x 100 mm, TX 25 x 200 mm
2x
932 A Screwdriver for Slotted Screws
1 x 5.5 x 100 mm, 1.2 x 7 x 125 mm
2x
350 PH Screwdriver for Phillips Screws
PH 1 x 80 mm, PH 2 x 100 mm
Datasheet